AHC 系列
Customization. Born rigid. Born versatile.
- Machine base is built as heavy as 18000 kg to offer the most rigid structure.
- 0.001° B-axis rotary table Ø800 mm embedded in fixed table plate 1600 x 810 mm, making it a highly versatile horizontal machining center.
- Spindle BT-50 with auto 2-speed gearbox and max. 26 kw power puts out a high-torque outcome for heavy cutting.
Please scroll left and right for full information
| Item / Model | AHC-1600 |
|---|---|
| Longitudinal Travel(X) Axis (mm) | 1600 (63”) |
| Vertical Travel (Y) Axis (mm) | 1270 (50”) |
| Column Travel (Z) Axis (mm) | 1016 (40”) |
| Spindle Center to Table Top (mm) | 140~1410 (5.5”~55.5”) |
| Spindle Nose to Table Center (mm) | 200 (7.9”)(min.) / 1216 (47.9”)(max.) |
| Flat Table Working Surface (mm) | 1600x810 (63”x32”) |
| Rotary Table Diameter (mm) | 800 (31.5”) |
| Maximum Workload on Flat Table (kg) | 4600 (10120 lb) |
| Maximum Workload on Rotary Table (kg) | 2000 (4400 lb) |
| Table Surface | Ground / T-Slotted |
| No. of T-Slots x Width (mm) | 5x18 (5x7”) |
| Spindle Motor (Standard) (kW) | 26 (35HP) |
| Spindle Torque (Standard) | 575 ft/lbs at only 375 rpm |
| Spindle Taper (Standard) | ISO-50 |
| Spindle Drive System (Standard) | 2 Speed Gearbox |
| Spindle Speed (Standard) (rpm) | 0~6000 |
| Spindle Motor (Opt. Inline Direct Drive) (kW) | 26 / 30 (35 / 40 HP) Fanuc |
| Spindle Torque (Opt. Inline Direct Drive) (rpm) | 122 ft / lbs at 1500 (258 ft / lbs at 500 Opt.) |
| Spindle Taper (Opt. Inline Direct Drive) | ISO-50 |
| Spindle Drive System (Opt. Inline Direct Drive) | Direct Drive |
| Spindle Speed (Opt. Inline Direct Drive) (rpm) | 0~10000 |
| Spindle Motor (Opt. Weiss Integral Motor Spindle) (kW) | 41 (56 HP) High Torque |
| Spindle Torque (Opt. Weiss Integral Motor Spindle) (rpm) | 300 ft / lbs at 1000 |
| Spindle Taper (Opt. Weiss Integral Motor Spindle) | HSK-100A |
| Spindle Drive System (Opt. Weiss Integral Motor Spindle) | Integral Motor |
| Spindle Speed (Opt. Weiss Integral Motor Spindle) (rpm) | 0~15000 |
| ATC-Number of Tools | 40 tools (60,80,120 Opt.) |
| ATC-Tool Selection | Bi-Directional Random |
| ATC-Tool Change Time | 6 sec tool to tool |
| ATC-Maximum Tool Diameter | 4.9” with Adjacent tools, 9.8” without |
| ATC-Maximum Tool Weight (kg) | 15 (33 lb) |
| ATC-Tool Type | CAT-50 (BT-50 / HSK-100A Opt.) |
| ATC-Maximum Tool Length (mm) | 400 (15.7”) |
| Ball screws and Axis Motors-X,Y,Z Ball screw Diameter | 2.0” X,Y,Z x 10 pitch |
| Ball screws and Axis Motors-Ball screw Type | Class 3 Double Nut Pre-Loaded |
| Ball screws and Axis Motors-Ball screws Mounting Type | Pre-Tensioned |
| Ball screws and Axis Motors-X,Y,Z,B Servo Motor (kW) | 7.0 / 4.0 / 7.0 / 4.0 (9.0-5.2-9.0-5.2 HP) |
| Ball screws and Axis Motors-Servo Motor Mounting | Direct Coupled XYZ |
| Feeds-Rapid Traverse Rate X,Y,Z,B (m/min) | 15,15,15,4 (590,590,590,157 IPM) |
| Feeds-Rapid Traverse Rate B Axis Rotary Table (rpm) | 11.1 |
| Feeds-Cutting Feed Rate (IPM) | 0.01~472 |
| Feed-Linear Positioning Acuracy | ±0.0003” Full Stroke |
| Feed-Linear Repeatability | ±0.0002” |
| Feed-B Axis Positioning with/without Scale | 5 Arc Seconds / 15 Arc Seconds |
| General-Coolant Tank Capacity | 120 Gallons |
| General-Weight (Base Machine Only) (kg) | 20000 (44000 lbs) |
| General-Dimension (LxWxH) (mm) | 4375x5560x3585 (171”x218”x141”) |
| General-Power Source | 208 / 220 Volts, 3 Phase 150 Amps** |
| General-Air Source (PSI) | 90 |
All the specifications above are subject to change without prior notice.
Standard Accessories
- Fanuc 0i-MF PLUS: (a).10.4” LCD (b).Manual Guide i
- Flood coolant system with programmable air blast
- Automated chip removal system with 4 screw type chip conveyors + chip buckets
- LED working lights
- 3-color signal tower
- Oil cooler for spindle & gearbox
- MPG
- Heat exchangers for electric cabinet
- Hydraulic counterbalance for headstock
- Rigid tapping
- 0.001° B-axis rotary table Ø800mm embedded into flat table 1600 x 810mm
- 40-tool ATC
- Full enclosure with interlocks system
- Complete set of machine manuals in English
- 1 pc of toolbox for basic maintenance
- Foundation bolts and levelling pads
- Automatic centralized lubrication system for ball screws and guideways with alarms
Optional Accessories
- Fanuc 31i-MB PLUS with 15” LCD
- Siemens SINUMERIK 828D with 10.4” LCD
- Siemens SINUMERIK ONE with 15” LCD
- Auto tool touch probe Renishaw TS-27R with automatic protective cover
- Auto non-contact tool probe Renishaw NC4 with automatic protective cover
- Workpiece measuring device Renishaw OMP60 (infrared transmission)
- Workpiece measuring device Renishaw RMP60 (radio transmission)
- 60, 80, 100 or more tools for ATC
- CTS 20 bar or 70 bar with cartridge type filtration system
- Paper filtration system
- Direct drive spindle at max. 10000 rpm with 26 kW or 30 kW max. power
- Motor spindle at max. 15000 rpm with 41 kW max. power
- Linear scales on X, Y & Z axes
- Absolute encoder on rotary table
